Omcan FGM, Технические характеристики, Страница: 11 / 36

11
Installation and Operation
pressure on the drilled plate for the cutting knife. When turning on, verify the Archimedean screw / grater
roll rotates counterclockwise. If there is clockwise rotation, switch off the machine, disconnect the plug,
disassemble it, disconnects the two phase conductions and invert their position.
FUNCTIONING DESCRIPTION
The control devices are designed and manufactured to handle normal service stresses and strains. The control
devices are clearly visible, locatable and marked distinctly. The main control devices are shown:
TYPE / COLOUR REFERENCE / DESCRIPTION
Button / Black “0” / button for the machine stop control
Button / White “1” / button for the machine start control
STARTING
The machine only starts with a voluntary action on the control device: white button “1” for the starting control.
STOP
For the stop control push the black button “0”. In case of momentary or extended stop, all food products must
be removed to get the machine to function again.
FUNCTIONING SAFETY
If the machine is under stress or is exposed to long functioning times or overload, the thermal protection
function will stop the machine. In this case, wait until it is completely cooled before proceeding to the starting
function.
VOLTAGE LACKING
In the case of the electric feeding breaking off of the machine and being disconnected, the machine will only
restarted after the electric feeding is back or there is re-connection to the power source.
STARTING
The machine only starts with a voluntary action on the control device: white button “1” for the starting control.
STOP
For the stop control push the black button “0”. In case of momentary or extended stop, all food products must
be removed to get the machine to function again.
FUNCTIONING SAFETY
If the machine is under stress or is exposed to long functioning times or overload, the thermal protection
function will stop the machine. In this case, wait until it is completely cooled before proceeding to the starting
function.
VOLTAGE LACKING
In the case of the electric feeding breaking of if the machine is disconnected, the machine will only be restarted
after the electric feeding is back or there is re-connection to the power source.