6
Safety and Warranty
•
Follow the instructions given in the manufacturer’s booklet for cleaning operations.
• This machine must be disconnected from the main electrical supply after use at the end of the day and for
any service/maintenance operation following this procedure:
- Switch the machine off from the control panel.
- Drain the tank by removing the overflow pipe.
- Disconnect the electrical supply by the omni-polar switch (main switch located on the wall).
- Shut the water supply valve(s).
Disregarding the aforesaid prescriptions is a serious misuse and can cause damages and injures to
property and people, and will relieve the manufacturer from whatever liability.
•
Do not use water to extinguish fires on electrical parts.
• Do not cover the intake or dissipation grids.
•
Water inlet to the machine 60PSI (400kPa) maximum.
NOTICE: this machine must be operated with an automatic detergent dosing pump including a visual
means to verify that detergents are delivered, or a visual or audible alarm to signal if detergents are
not available for delivery to the washing system. Please see instructions for electrical and plumbing
connections located in this manual and in the feeder equipment manual.
Note: the manufacturer declines any responsibility for accidents to people or any damage deriving
from failure to observe the above listed instructions.
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Содержание CD-IT-50-2
