Omcan CD-IT-50-2, Инструкция по эксплуатации

Страница: 5 / 40

5
Safety and Warranty
WARNINGS
This instructions booklet must be kept with the machine for future consultations. If the machine is sold or
transferred to other users, make sure the booklet always goes with the unit so that the new owner can have
all the necessary information on operations and all relevant instructions. The dishwasher shall be installed
in accordance with local codes, or in the absence of local codes, installed in accordance with the applicable
requirements in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC), Part 1, CSA C22.1,
and Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, NFPA 96. These
warnings are provided to safeguard the user in conformity with technical standards UL 921 and NSF3.
The instructions booklet must be carefully read before installation and before starting the machine. The user
must comply with the following rules:
• Adaptation of the electrical and water system for dishwasher installation must be carried out by qualified
operators only.
• The user shall not carry out any repair and/or maintenance operations.
• When the main switch is OFF, only qualified personnel can access the control panel.
• Servicing of this machine must be performed by authorized personnel only.
Note: use genuine spare parts only. Non-genuine parts will void the warranty and the manufacturer
will take no responsibility for any damage.
• Do not use old hose, but only new ones.
• This appliance can be used by trained youth aged from 15 years and above. It cannot be used by persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
• Children shall keep off the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• This machine is designed exclusively for washing plates, glasses, trays, baskets and various pots and
pans with human food type of residue. DO NOT wash articles different from those stated above and fragile
objects or materials not resistant to washing process.
• It is mandatory to install on the machine feeding line, exclusively dedicated for this unit:
- A fuse protection system with the characteristics shown on the data-plate (or an equivalent system).
- A suitable omni-polar switch, sized according to the absorption shown on the data plate, in order
to disconnect the power network completely. Only such a switch grants a full warranty of a complete
separation from the electric network and it has to be used, always and strictly, before any intervention on
the electrical panel, and by qualified personnel only. This switch shall be installed in the immediate vicinity
of the machine. Only this switch must be used, always and strictly, to de-energize the machine at the end of
the work session.
• Make sure the appliance is linked to an efficient ground connection.
• Do not open the machine doors when operating. After switching the machine off, wait for at least 15
seconds after the motors stop.
WARNINGS: IT IS FORBIDDEN TO INSERT HANDS AND/OR TOUCH INTERNAL PART WHEN THE
MACHINE IS OPERATING AND/OR AT THE END OF THE WASH CYCLE.
• Before using the machine, the personnel shall know the position of the omni-polar switch that disconnected
the machine from the electrical network, the position of the water connection shut-off valve and the
procedures to switch off and secure the machine.