Omcan CD-IT-50-2, Инструкция по эксплуатации

Страница: 13 / 40

13
Installation and Operation
• Copper, brass, pewter or aluminum objects: they may become discolored or opaque.
• The decorations on glass, after a certain number of washes, can lose gloss.
• Fragile glasses or crystal items, if often washed, can become opaque. We recommend to buy exclusively
crockery and cutlery suitable for dish washing. After several washes, the glass can become opaque.
It is mandatory to repeat the washing cycle if at the end of the cycle the crockery are not well clean or
if there are washing residues (glasses, cups, bowls, etc. with liquid inside).
WARNINGS:
• Do not slam the door when opening and closing.
• Do not put material or objects on the machine.
• The water used for the washing and the rinsing is not potable because of the presence of chemical
additives. In case of contact with skin or eyes wash them immediately with plenty of water and check the
safety instructions of the detergent manufacturer. If necessary, contact a doctor.
• Some important rules must be followed for the use of this appliance:
- Never touch the appliance with wet hands or feet.
- Never use the appliance when barefooted.
- Do not install the appliance in places exposed to water splashes.
• This machine must be disconnected from the main electrical supply after use at the end of the day and for
any service/maintenance operation. Switch off the main switch located on the wall, which shall be installed
by a professional installer. Shut the water supply valve(s).
WARNING: INTERNAL CLEANING OF THE MACHINE SHALL BE CARRIED OUT AT LEAST 10 MINUTES
AFTER IT HAS BEEN TURNED OFF.
WARNING: DO NOT INSERT HANDS AND/OR TOUCH THE PARTS LOCATED AT THE BOTTOM OF THE
WASH TANK AND/OR AT THE END OF THE WASH CYCLE.
DETERGENT USE
ONLY use NON FOAMING types suitable for industrial glass-washers and dishwashers. It is advisable to use
liquid detergents. The detergent must be put directly in the tub. The correct amount will be suggested by the
product manufacturer according to the water hardness. By request, the dishwasher can be equipped with an
automatic detergent dosing pump (always recommended). 3/8 inches (1 cm) of the product drawn into the tube
is equal to about 3/32 Dr (0,15g). A correct amount of detergent is very important for a successful wash. This
machine must be operated with an automatic detergent dosing pump. Verify the correct operation by checking
the detergent flow in the transparent suction hose from the detergent canister. Make the check during tank
filling or rinse phase.
RINSE AID USE
The machine is equipped with a rinse aid dispenser. The machine automatically draws the product. The rinse-
aid chemical, shall be suitable for professional glass and dishwashers. It is advisable to rely on specialized
retailers in the sector. The amount dispensed can be regulated by operating the fine-adjustment screw on
the dispenser. Reduce the amount by turning the screw clockwise, increase by turning it anticlockwise. The