7
Safety and Warranty
HANDS:
to protect your hands, wear mesh protective gloves to replace the
BLADES ONLY
.
Make sure that
the machine is off and power has been disconnected before changing the blades.
The warranty can be exerted through the retailer (therefore it is exerted by Omcan) and:
•
It always starts from the date when the machine is delivery by Omcan’s authorized retailers and lasts for a
maximum period of 12 (twelve) months;
•
It guarantees the free replacement of the pieces which might break or abnormally wear due to assessed
faults of design, supply, construction, or assembly which can be attributed to Omcan;
• The request for a free repair has to be directly addressed to Omcan or the dealer where the machine has
been purchased;
•
As for the repair (both free of charge and not), the machine has to be put in safe conditions (in the original
packing or one similar to the original packaging), fully at the cost of the person requiring such repair. It must
be sent to Omcan or those who have been authorized by the Manufacturer to perform the repair (both free
of charge and not);
•
Possible faults in planning, supply, construction, assembly, appearance, functioning, training which can
be attributed to Omcan have to notify Omcan by letter with return receipt and sent to the registered office.
Omcan must be informed even by fax and/or e-mail in order to avoid further damage and/or accidents;
• The non-fulfillment of these rules releases Omcan from the consequences of further damage and/or
accidents subsequent to delayed or omitted communications;
WARRANTY EXCLUSIONS
WARNING!
The warranty of Omcan
NEVER INCLUDES
:
• The replacement of the machine after a service required for a failure;
•
The reimbursement for the working hours used by staff not directly entrusted by Omcan to carry out
services and/or repairs;
• The reimbursement for consumption, rent of equipment or purchase of equipment to carry out services and
repairs by staff not directly entrusted by Omcan;
•
The transportation of the machine to and from the authorized service center are fully at the cost of the
person requiring repair.;
•
The necessary packaging to transport the repaired machine if it has been delivered without the original
packing.
•
The reimbursement for damaged or destroyed possessions or goods;
• The reimbursement for loss of profit, service interruption, expenses of any kind, penalties, or corporate
image damage;
• The reimbursement for loss from other equipment, machines or manufacturing lines working together with
this machine, subsequent to damage or destruction of things or goods in these equipment or machines or
lines;
•
Damage caused by the unsuitability of the environment where the machine is located (humidity,
temperature, electromagnetic fields or dirt which exceed the limits established by this handbook and those
established by law);
•
Phenomena which do not depend on the normal functioning of the machine (atmospheric electric
discharge, power stress, fire, flooding, etc.);
•
Defects or failures caused by use not listed in this manual;
•
Defects depending upon the wrong use of the machine by anyone and those defects which appear after
