manualshive.com logo in svg
background image

6

Safety and Warranty

PERSONAL PROTECTIVE EQUIPMENT IN CONFORMITY WITH CURRENT RULES: 

all the following 

personal protective equipment (PPE) has to be in conformity with relevant technical rules in force (Directive no. 

89/656/CEE and following amendments and updates) and therefore has to be EC-marked and have relevant 

declaration of conformity which usually refers to specific European (EN) technical rules of the harmonized 

type. The operators must always inform the employer, manager and/or representative of the anomalies in the 

operation or characteristics of the use of their personal protective equipment.

HEAD:

 It is mandatory to use a cap to keep the hair gathered and to avoid entanglement within the moving 

elements; also for hygienic reasons, the cap must always be clean and must be able to retain all hair.

EYES:

 To protect the eyes from bone splinters or accidental blade breaking, the wearing of safety glasses is 

mandatory.

NOSE, MOUTH:

 To protect the respiratory tract from toxic emissions, pieces of meat or similar substances 

under processing, the operator must wear a filtering mask. It is also necessary to wear a filtering mask for 

hygienic reasons. The masks have to be replaced when they show signs of dirt or partial clogging or 2 (two) 

working days.

EARS:

 The machine does not produce a loud noise and according to the tests performed it produces a level 

of continuous acoustic pressure equivalent weighted “A” of 82 dB(A) ± 1 dB(A) vacuum and of 88 dB(A) ± 1 

dB(A) in the dry cutting of bones particularly big and strong. Ear protectors (protective headset) are strongly 

recommended and workers must be instructed on their correct use. The use of new blades or very sharp 

blades and water-lubrication of the cutting area of bones contribute to reducing the noise. The duration of the 

noise, the characteristics of the buildings, and the noise of adjacent machines contribute to a louder noise. 

Submit workers to regular health checks.

LIMBS AND BODY (what not to do):

 Never wear rings, wrist watches, bracelets, jewelry, torn dresses, loose 

clothing, scarves, ties, loose belts as they might get entangled and cause serious accidents.

LIMBS AND BODY (what to do):

 For the protection of the operator, always wear overalls or coats with elastic 

cuffs; both have to be wore tight, without leaving them open or just partially tight; tighten the sleeves around 

the cuffs and always keep your hair gathered in a cap.

FEET:

 it is mandatory to wear safety shoes with steel toes to protect the feet from the fall of heavy objects (the 

machine itself or its spare parts or big blocks of frozen food).

Содержание BS-IT-1524

























Отзывы: