
10
Installation
STEP 4
1. Use 1/4” x 14 screw 4 pcs and 5/32” x 10 screw 2 pcs. to install the oil collecting box.
- The front of the oil collecting box is facing up, and the end with the card slot is inserted into the oil
collecting box bracket in parallel.
- After the oil collecting box is inserted, the card slot is inserted into the oil collecting box bracket buckle,
and the assembly is completed.
2.
Installation of burner protection cover, ignition pin fixing cover and furnace body assembly.
STEP 5
1. Install the chimney top and chimney.
2. Use 5/32” x 10 screw 4 pcs./each 1/4” x 14 screw 4 pcs. chimney. Install the chimney.