background image

6

•  Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly 

grounded.

• 

Do not kink or pinch the power supply cord.

• 

It is recommended that a separate circuit, serving only your ice maker, be provided.

• 

Use receptacles that cannot be turned off by a switch or pull chain.

• 

Do not connect or disconnect the electric plug when your hands are wet.

• 

Unplug the ice maker or disconnect power before cleaning or servicing. Failure to do so can result in 

electrical shock or death.

•  Never unplug your ice maker by pulling on the power cord. Always grip plug firmly and pull straight out from 

the outlet.

• 

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use 

a cord that shows cracks or abrasion damage along its length or at either end.

• 

When moving the ice maker away from the wall, be careful not to roll over damage the power cord.

Proper Disposal of the Ice maker

• 

Choose a well-ventilation area with temperatures above 50°F and below 100°F. This unit must be installed 

in an area protected from the elements, such as wind, rain, water spray or drips.

• 

To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed.

• 

The machine should not be located next to ovens, grills or other sources of high heat.

• 

It is important for the ice maker to be leveled in order to work properly. You may need to make several 

adjustments to level it.

• 

Never allow children to operate, play with or crawl inside the ice maker.

•  Never clean ice maker parts with flammable fluids. These fumes can create a fire hazard or explosion.

•  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other 

appliance. The fumes can create a fire hazard or explosion.

• 

Do not put anything inside the ice maker cabinet and ice storage bin.

• 

Turn on the water supply tap before switch on the ice maker. Never turn the water supply tap off when the 

ice maker is working.

• 

Never touch the evaporator surface by hand when the ice maker is working. Otherwise it may hurt your 

hands.

• 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by person responsible for their safety.

Safety Alert Symbols

Your safety and the safety of others are very important. We have provided many important safety messages in 

this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt 

you and others. All safety messages will follow the safety alert symbol and either the word 

“DANGER” “WARNING” or “CAUTION”, these words mean:

Safety and Warranty

Содержание 37865





























Отзывы: