9
ASSEMBLY INSTRUCTIONS
7
7. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
hole of the lower plate cover and onto the
middle plate. Check and ensure that the glass
tube is positioned properly and is completely
covering the center hole of the middle plate.
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
WARNING! The black
silicone ring must be in place
prior to operating the heater.
BLACK SILICONE
RING
Hardware Used
8
8
.
Hang a lower protective guard onto hooks
on the lower supports, make sure the hooks
are engaged. Then put 2 tube connectors on
the protective guard. Follow the same steps to
finish the assembly of remaining 3 lower
protective guards. Attach a upper protective
guard on upper supports. Make sure that upper
protective guards are correctly inserted into 2
tube connectors on top of lower protective
guards. Secure the upper protective guards
with a fixing bracket using a 3/16’’screw.
Follow the same steps to finish the assembly
of remaining 3 upper protective guards.
E
F
DD
KK
x 4
Philips
screwdriver
3/16” Screw
x 1
HH
Fixing
Bracket
x 4
II
Tube
Connector
x 8
