Ombra 120v, Руководство пользователя, Страница: 9 / 44

EN
7
4. Unscrew and remove the
NEBULIZER TOP
. Carefully place prescribed medication into
NEBULIZER CUP
. Reattach
the
NEBULIZER TOP
, making sure to line up the
WHITE CYLINDER
with the
STEM
of the
NEBULIZER CUP
and
gently hand tighten until a stop is detected. Correct assembly is shown in Figure 6. Ensure nebulizer is kept in an upright
position so medication does not spill.
FIGURE 6
FIGURE 7
6.
Plug the
Ombra
* Table Top Compressor into an electrical outlet.
7. In a relaxed, comfortably seated position, pick the nebulizer up out of the
CUP HOLDER
. Switch on the compressor
and start your treatment.
8.
When your treatment is complete or during a rest in your treatment, the nebulizer may be placed back in the
CUP
HOLDER
and the compressor switched off.
NOTE: The compressor should be unplugged when not in use.
5.
Connect one end of the
EZ Twist TUBING
to the fitting on the bottom of the nebulizer and the other end to the
AIR
OUTLET
on the compressor. Ensure both ends are securely engaged. The nebulizer may then be placed in the
CUP
HOLDER
on the compressor until you are ready to start your treatment as shown in Figure 7.