FM TRANSMITTER
TR
EM
1000
HE
DIG
PLUS
COMPACT
Technical Manual 1v2 November 2019
26
2.2.2 Operating frequency
5) Ensure that the
FREQUENCY
sub-menu is selected; otherwise, turn the knob to select it.
6) Press the knob to access the sub-menu. The following screen will appear:
7) Ensure that the
EDIT
option is selected; otherwise, turn the knob to select it, then press to
confirm.
8) A value will be indicated after
Step
(frequency steps).
9) Turn the knob until you select the frequency step required to exactly set the required
operating frequency, then press the knob to confirm.
Normally, it is sufficient to leave it at
100KHz
(e.g., operating frequency of 91.50 MHz).
Otherwise, if the operating frequency is defined at a step lower than 100 KHz (e.g., operating
frequency of 97.850 MHz), you will need to select the 10 KHz step.
10) A value will be indicated after
Frequency
. Turn the knob until you reach the exact
operating frequency desired, then press the knob to confirm.
11)
OK
will be highlighted. Three choices are now available:
- If the parameters set are correct – skip directly to step 12) to confirm the settings.
- If the parameters set are all incorrect – cancel all settings by turning the knob until
ABORT
is
highlighted, then skip to step 12).
- If a slight adjustment to the parameters is required – turn the knob until
EDIT
is highlighted,
then return to step 8.
12) Press the knob to confirm. You will return to the page indicated in step 3).
