manualshive.com logo in svg

OMB EM 1000 HE DIG PLUS COMPACT, Техническое руководство

Поделиться
Скачать
OMB EM 1000 HE DIG PLUS COMPACT Скачать руководство пользователя страница 20

             FM TRANSMITTER 

 

TR 

         

 

 

EM 

1000 

HE 

DIG 

PLUS 

COMPACT

 

 

Technical Manual 1v2 November 2019 

 

15 

 

1.4 Installation 

1.4.1 Check the supplied parts 

Before using your transmitter, ensure that the following parts are included in the package: 

• The transmitter 

• The user manual 

• A power cable supplied with a suitable connector 

If any parts or missing or damaged, contact your supplier at once. 

 

1.4.2 General safety rules   

Warning! In order to prevent serious damage to objects or people, the following rules must 
be strictly followed. 

• Although no special instruments are required in most cases, the device should be installed 
by skilled personnel only. To make best use of the device and prevent damage to the unit, it is 
necessary to comply with the instructions outlined in this manual. 

Should doubts or technical problems arise during the installation procedure, it is strongly 
recommended that you contact OMB or a local agent/dealer. 

• Should technical problems or doubts of any kind arise during installation, OMB would be 
happy to provide qualified technical assistance. Technical intervention by personnel not 
authorized by OMB should not be performed. 

• As a rule, the user should not access the inside of the device. Tampering with the factory 
settings renders our warranty null and void, and may also affect the device’s performance, 
causing costly damage. 

• No adjustments or internal calibrations are required for normal operations. The device must 
be properly grounded and must be used with all the covers closed in order to prevent 
electrical shocks and to fully comply with EC, EMI, and other safety regulations. 

• Never touch the inside of the device without first disconnecting it from the mains. AC, DC, 
and radiofrequency voltages are present inside the device and can be dangerous when the 
covers are removed. 

• Do not operate the device without the covers properly screwed into place. Using an open 
transmitter may be dangerous to objects or people. In addition, if the top cover is removed, 
this may cause the device or other electronic measurement instrument to perform incorrectly 
due to the elevated RF fields. 

 

1.4.3 Placement of the device 

- Choosing the proper room and placement 

• Install the device in a dry, sheltered, well-ventilated room away from dust, moisture, 
insects, and rodents (mice). 

Содержание EM 1000 HE DIG PLUS COMPACT




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды