Omax ProtoMax, Руководство по эксплуатации

Страница: 34 / 45

h. Click Close .
Figure 267
i. Verify there is no moisture or debris in the abrasive feed tube .
j. Insert the garnet abrasive tube into the nozzle .
Figure 268
k. Close the MAKE software.
2. Turn OFF the laptop .
3. Clean the machine with a clean, damp cloth.
NOTICE
Never spray water on the electrical control cabinet or exterior surfaces of the
machine. Water may enter the electrical control cabinet and damage internal
components.
a. Remove any cutting debris from the cutting stage .
b. Remove any cutting debris from the axes bellows .
c. Remove any cutting debris from the lid .
d. Close the lid .
e. Wipe down the exterior surfaces of the machine.
CAUTION
Use care when opening or closing the lid to avoid injury. Keep hand, fingers, or
body part away from the side of the table when closing the lid. Never let the lid
free-fall.
4. Turn OFF [1] the ProtoMAX.