•
Ensure the equipment is properly grounded in accordance with national, state,
and local codes. Never remove any prong from the plug. Always plug into a
proper electrical outlet.
•
To reduce the risk of electric shock, during a malfunction or breakdown,
grounding provides the electric current with a path of least resistance. The
machine is equipped with an electric cord designed with an equipment-
grounding conductor (EGC) and a grounding plug
(United States, Canada and
Mexico only)
. You must plug the cord into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
•
Do not modify the plug provided
—
if it does not fit the outlet, have the proper
outlet installed by a qualified electrician.
•
Connecting the EGC improperly can result in electric shock.
•
Contact a qualified electrician or service personnel if you do not understand the
grounding instructions, or if in doubt as to whether the equipment is properly
grounded.
•
Do not use extension cords with the equipment.
•
If the cord is damaged or worn, immediately replace it. Contact OMAX for
replacement parts and instructions for replacement. The insulation of the EGC is
covered with a green or green with yellow-striped surface. If replacement of the
electric cord or plug is necessary, do not connect the equipment-grounding
conductor to a live terminal. Refer to the equipment-specific wiring
configuration.
•
The equipment is intended to be used on a circuit with an outlet similar to the
one shown
(United States, Canada and Mexico only)
:
Figure 205
•
The grounding plug is similar to the one shown
(United States, Canada and
Mexico only)
:
Содержание ProtoMax
Страница 45: ......