Omax M827L Series Скачать руководство пользователя

Страница: 3 / 14

www.microscopenet.com

Caution

1. Open the carton carefully with a knife or paper cutter.

Find the “UP” sign and place

the Styrofoam container on the side that makes the arrow upward. If the

“UP” sign

is missing, please open the Styrofoam container gently to prevent any accessory,
i.e. objectives or eyepieces, from dropping and being damaged.

2. Do not discard the molded Styrofoam container. The container should be retained

should the microscope ever requires reshipment.

3. Keep the instrument out of direct sunlight, high temperature or humidity, and dusty

environments. Ensure that the microscope is located on a smooth, level and firm
surface.

4. If any specimen solutions or other liquids splash onto the stage, objective or any

other component, disconnect the power cord immediately and wipe up the spillage.
Otherwise, the instrument may be damaged.

5. All electrical connectors (power cord) should be inserted into an electrical surge

suppressor to prevent damage due to voltage fluctuations.

6. Confirm that the input voltage indicated on your microscope corresponds to your

line voltage. The use of a different input voltage other than that as indicated will
cause severe damage to the microscope.

Содержание M827L Series














