Omarv Bologna 320 Скачать руководство пользователя страница 12

BOLOGNA 

- FLY MOWER

12

To connect the machine to the tractor you will need:

• approach the tractor in such a way as to align the bore hole at the tractor’s traction hole;

• Stop the tractor, turn off the engine, insert the parking brake and remove the ignition key 

from the panel;

• rotate the support leg lever (A) to align the eye to the towbar

• Insert the towbar pin (B) by connecting the eye (C) to the tractor;

• Insert the drive shaft (D) into the power socket

• Insert the hydraulic control pipes (E) and (F) into the tractor attachments.

“Warning!

Before proceeding to the positioning of the machine it is necessary to do an attentive preventive visual verification in order to individualise 

possible damages undergone during the phases of transport.”

In the case in which one or more components were turning out to be victims it is indispensable not to proceed further with 

the installation and to indicate to the firm builder the found anomaly, when there were agreeing with the same one the 

actions to be made. During the cleaning operation the attached staff must be provided with the individual protection devices 

necessary (DPI).

“Warning!

To verify that the zone chosen for the positioning has a surface of support adjusted to the weight of the machine. 

The hydraulic, electric connections must be carried out at expert and suitably trained staff provided with the necessary devices of individual 

protection (DPI). To avoid folding the flexible pipes. To prevent the flexible pipes and the electric cables from being in contact with sharp-cornered 

or cutting parts. The assembling and the regulations of the equipment must be carried out by machine it stops, with the de-activated fountains of 

energy. Before making any manual, necessary movement for the regulations and adjusted of the machine and of the equipment, to be verified that 

work zone is it moves at persons’ and varied tools and that anomalies, waves do not exist to avoid dangers for the persons and damages of the 
machinen 

Safety rules for tractor attachment

The machine is provided with a strap attachment sized according to the effort exerted on it.

During tractor attachment operations, make sure the tractor is switched off, the ignition key is off and the parking brake is 

actuated.Within 15 meters of the machine there are no persons or animals who are not authorized or authorized, which could 

cause damage to the operator or the machine as well as to themselves.

Having read and understood all parts of this manual.

Installation

“Warning!

Always use the appropriate Personal Protective Equipment (safety shoes, work gloves, workwear).

• Lift the support foot (E) of the machine by turning the lever (A).

Содержание Bologna 320




















Отзывы: