POWER
•
Input voltage is.110v~240v AC 50/60hz. into the AC/DC adapter power block.
•
Output voltage is 4.5v @1000ma out of the AC/DC adapter power block.
•
WARNING – RISK OF FIRE
. On rechargeable LED models, Do not charge the internal NiMH batteries for more than two hours.
Remove AC power when batteries are charged. Failure to comply with these instructions can cause a risk of fire.
SPECFICATIONS
For individual specifications, please view the respective product page on the website at
www.microscope.com
CARE & MAINTENANCE
Most Omano microscopes are backed by lifetime limited warranties and with adequate care and maintenance, you should have many years of
enjoyment and use of your microscope. We recommend the following basic routines:
1) Always cover the microscope with the dust cover when not in use. Store in a dry place.
2) Do not touch the optical lens with bare fingers.
3) Dust should be cleaned off with pressurized air or with a soft brush or lens paper.
4) Clean smudges, fingerprints, oils, etc from the lens with clean lens paper or a soft clean cloth moistened with a small amount of
absolute alcohol-ether mixture. If an alcohol-ether mixture is unavailable, use isopropyl alcohol.
5) Wipe clean 100x objective immediately after using immersion oil.
6) Clean the microscope body and stand using a moist, soft cloth with a small amount of detergent.
7) Use water only on plastic surfaces. Do not use paint thinner or other solvents.
8) Dry all surfaces after cleaning.
