omal automation DA08, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 25

EN -
9
OMAL S.p.A.
Headquarters
: Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) Italy •
Production Site:
Via Brognolo, 12 - 25050 Passirano (BS) Italy
Ph.
+39 030 8900145 •
Fax
+39 030 8900423 • info@omal.it •
www.omal.it
Rif. UMA800081A - 02/18
INSTALLATION, USE AND MAINTENANCE MANUAL
PNEUMATIC ACTUATOR “DA08”
IT
EN
Shoul it be necessary to replace the piston seals, the operation must be carried out by OMAL S.p.A. or
anyway by qualified personnel and with the appropriate tools: it is advisable to return the actuator to
OMAL S.p.A., which will be checked and tested before returning it.
OMAL S.p.A. can supply, upon request a kit with spare seals.
OMAL S.p.A. declines all responsibility for products that are repaired by third parties.
7) MAINTENANCE
The OMAL SpA actuator, when installed and used properly, does not require maintenance, under normal
use, as it’s provided with sufficient lubrication for standard duration.
If the cap or piston seals need to be replaced, OMAL SpA can supply a kit with spare parts.
WARNING
The seals must be replaced by qualified personnel and with the appropriate tools
OMAL S.p.A. declines all responsibility for products that are repaired by third parties.
Components list
POS DENOMINATION
1 Cylinder
2 Piston
3 Cap
4 Shaft
5 Pin
6 Bush
7* Roller
8* Cap sealing
9* Seeger
10* Washer
11* Support ring
12* O-ring
13* O-ring
14* Internal support ring
15* O-ring
16
Screws
Parts included in the spare parts
kit – CODE: KGD10010