30
Measured driving power is 53 Watts.
Now switch to
OPER
, press
PTT
and apply
RF
from TCVR. See the following picture.
Output power is 1507W, reflected power
reached abt. 4W and screen current is abt.
-8 mA.
If your antenna has
different
impedance
than real 50 Ohms then is necessary to
start the
M-TUNE procedure
to optimize
PA adjustment (press
MENU, M-TUNE
)
and make the manual adjustment.
This is the result after manual adjustment
process. Output power increased to 1585
W. Screen current is now abt. +10 mA.
These parameters were
SAVED
.
Notice:
is factory adjusted to maximum output power of 1500W to the real load 50 Ohms.
Unique Tuning table with TUNE and LOAD values for every band is supplied with each PA.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.