27
PA will automatically set 20mA of EBS.
You can try to do this manually, too.
Scroll to
SET EBS1 MANUAL
and press
SET.
Use left/right button to set 20mA or as
close as possible value and press
SAVE
.
Similar
ways
EBS2
can
be
preprogrammed (250mA).
Scroll to
CALIBRATION Ip, Is
and press
SET
.
Calibration
will
be
done
automatically.
Go to the bottom line.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.