6 EN
Preparations for shooting
1
Charging the battery
Connect the USB cable and USB-AC adapter to the camera and charge the battery.
• The battery is not fully charged at shipment. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 5 hours).
Connecting the camera
AC outlet
Multi-
connector
USB cable
(supplied)
Indicator lamp
Indicator lamp
On: Charging
Off: Charged
When to charge the batteries
Charge the battery when the error
message shown below appears.
Error message
Battery Empty
Flashes in red
• The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs
depending on the region where you purchased the camera. If you received a plug-in type
USB-AC adapter, plug it directly into AC outlet.
• The included USB-AC adapter has been designed to be used for charging and playback.
Do not take pictures while the AC adapter is connected to the camera.
• Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the
charging is complete or the playback ends.
• For details on the battery, see “Battery Handling Precautions” (P. 95). For details on the
USB-AC adapter, see “USB-AC adapter” (P. 96).
• If the indicator lamp does not light, check the USB cable and USB-AC adapter
connections.
• The battery can be charged while the camera is connected to the computer via USB.
The charging time varies depending on the performance of the computer. (There may be
cases in which it takes approx. 10 hours.)
Содержание XZ-2
Страница 101: ......
Страница 102: ...VM576101 ...