Olympus XZ-10, Инструкция по эксплуатации

Страница: 15 / 89

15 EN
Basic photography
2
Warning display
example (blinking)
Status Action
2000 2000 F1.8 F1.8
The subject is underexposed. Set the shutter speed slower.
125 125 F8 F8
The subject is overexposed.
• Set the shutter speed faster.
• If the warning display does not
disappear, the metered range
of the camera is exceeded.
Set [ND Filter Setting] to [On].
“Using live control” (P. 31)
Choosing aperture and shutter speed (
M
manual mode)
In mode
M
, you choose both the aperture and the shutter speed. Set the mode dial to
M
,
and set the shutter speed with the control ring, and the aperture value with the sub dial.
• The shutter speed can be set to 1/2000 – 30 sec.
• You can change the functions assigned to the control ring and the sub dial.
g
[Dial
Function] (P. 51)
#
Cautions
• Exposure compensation is not available in
M
mode.
Noise in images
While shooting at slow shutter speeds, noise may appear on-screen. These phenomena
are caused when current is generated in those sections of the image pickup device that
are not normally exposed to light, resulting in a rise in temperature in the image pickup
device or image pickup device drive circuit. This can also occur when shooting with a high
ISO setting in a high-temperature environment. To reduce this noise, the camera activates
the noise reduction function.
g
[Noise Reduct.] (P. 52)