59
5
EN
Menu setting method
Menu setting method
+−
button
9
0
button
OK
`
/
MENU
button
Rearranging files [Replace]
You can move a file in a folder to change the
order of playback. First select the folder (file)
for which you want to change the playback
order.
1
Select the folder for which you
would like to rearrange the song
order (
☞
P.22 to P.24).
2
While the recorder is during stop
mode, select [
Replace
] from the
menu on the [
File Menu
].
• For details on how to enter the menu
settings, see “
Menu setting method
”
(
☞
P.47).
3
Press the
+
or
−
button to select
the file you want to move.
FM Menu
Rec Mode
You can change the recording mode when
recording from the FM radio. Select a
recording mode to suit your purpose.
[
PCM
]: The recording rate will be
automatically set to [
44.1 kHz/16 bit
].
[
MP3
]: The recording rate will be
automatically set to [
128 kbps
].
[
WMA
]: The recording rate will be
automatically set to [
ST HQ
].
Auto-preset
Refer to “
Presetting radio stations
automatically [Auto-preset]
” (
☞
P.43).
Scan sense
You change the scan sensitivity when
scanning for radio stations with auto preset.
Select the sensitivity to suit the reception
conditions.
[
High
]: Receive radio station signals using
high sensitivity. You should normally
select this setting.
[
Low
]: Receive radio station signal using
reduced sensitivity. Try this setting when
there is interference by signals from
unwanted stations.
Output
You can change the audio output of the FM
radio.
[
Earphone
]: Output sound from earphones.
Sound will not be output from the
built-in speaker even if you unplug the
earphones.
[
Speaker
]: Always output sound from built-
in speaker. Sound will not be output from
earphones even if you plug them in.
• This is different function to [
LCD/Sound
Menu
] of [
Speaker
]. Irrespective of the
[
Speaker
] setting, in the case that you
have set [
Output
] to [
Speaker
] when
listening to the FM radio, sound from the
radio will still be output from the speaker
(
☞
P.57).
For WS-710M:
