Olympus UWIT-Y0001-RX, Руководство по эксплуатации

Страница: 9 / 62

Important Information — Please Read Before Use
5 UWIT-Y0001-TX, UWIT-Y0001-RX INSTRUCTION MANUAL
„
User qualifications
If there is an official standard on user qualifications to perform endoscopy and endoscopic treatment
that is defined by the medical administration or other official institutions, such as academic societies on
endoscopy, follow that standard. If there is no official qualification standard, the operator of this
instrument must be a physician approved by the medical safety manager of the hospital or person in
charge of the department (department of internal medicine, etc.). The physician should be capable of
safely performing the planned endoscopy and endoscopic treatment following guidelines set by the
academic societies on endoscopy, etc., and considering the difficulty of endoscopy and endoscopic
treatment. This manual does not explain or discuss endoscopic procedures.
„
Instrument compatibility
Refer to the “
„
System chart” on page 43 to confirm that this Wireless Image Transmitter Unit is
compatible with the ancillary equipment being used. Using incompatible equipment can result in
patient injury or equipment damage and makes it impossible to obtain the expected functionality.
This instrument complies with the EMC standard for medical electrical equipment; edition 3
(IEC 60601-1-2: 2007), edition 2 (IEC 60601-1-2: 2001). However, when connected with an instrument
that complies with the EMC standard for medical electrical equipment; edition 1 (IEC 60601-1-2: 1993),
the whole system complies with edition 1.
„
Repair and modification
This Wireless Image Transmitter Unit does not contain any user-serviceable parts. Do not
disassemble, modify or attempt to repair it; patient or operator injury, equipment damage and/or the
impossibility to obtain the expected functionality can result. Some problems that appear to be
malfunctions may be correctable by referring to Chapter 7, “Troubleshooting”. If the problem cannot be
resolved using the information in Chapter 7, contact Olympus. This instrument is to be repaired by
Olympus technicians only.
Change or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
All interface cables used to connect peripherals must be shielded in order to comply with the limits for
a digital device pursuant to Subpart B of Part 15 of FCC Rules.