Olympus SZX10, Инструкция по эксплуатации

Страница: 13 / 36

9
SZX10
# Be sure to hold the binocular assembly @ with both hands to make
this adjustment.
To prevent damaging the mechanism, do not apply an excessive
force beyond the stop position.
While looking through the eyepieces, hold the left and right of the bin-
ocular assembly @ and adjust the eyepieces by opening or closing
them for binocular vision until the left and right fields of view coincide
completely.
}Ensure that the eyepiece clamping knob @ is tightened before starting
the adjustment.
Adjusting the diopter specific to the two eyes of each observer allows
the parfocality to be ensured across zoom magnifications.
When Not Using the Eyepiece Micrometer Disk
1. Look into the right eyepiece and rotate its diopter adjustment ring ² so
that the peripheral part of the visual field looks sharply.
2. Place an easy-to-observe specimen on the stage plate.
3. Rotate the zooming knob ³ to a low magnification and, looking only
into the right eyepiece, focus the specimen using the coarse and fine
focus adjustment knobs.
4. Rotate the zooming knob ³ to the highest magnification and, looking
only into the right eyepiece, focus the specimen using the coarse and
fine focus adjustment knobs.
5. Rotate the zooming knob ³ to the lowest magnification, look only into
the left eyepiece, and focus the specimen by rotating the left diopter
adjustment ring | instead of the coarse and fine focus adjustment knobs.
4-3 Observation Tube
1 Adjusting the Interpupillary Distance
(Fig. 8)
2
(Fig. 9)
Adjusting the Diopter
(Zoom Parfocal Adjustment)
Fig. 8
@
Fig. 9
@
²
³
|
Zoom Magnification Indication Sticker (DFPLAPO1.25X Only)
} The DFPLAPO1.25X objective is provided with a sticker that indicates a set of total
magnifications available * during observation.
* When a 10X eyepiece is used.
} Affix the sticker securely to the knob. Otherwise, the sticker may peel off during use.
} Affix the sticker while paying attention to the roundness of the knob.
} The zoom magnification indication sticker can only be affixed to the right zooming
knob.
# Affixing of the sticker blocks the body zoom magnification indication of a 1X
objective.
1. Turn the zooming knob to align the minimum magnification (“0.63”) with the mark-
ing.
2. Peel the back off the zoom magnification indication sticker
1
and affix it so that the
“0.63” indication the right zooming knob is overlaid on the “0.8” indication of the
sticker
1
.
@