Olympus SZ61, Инструкция по эксплуатации

Страница: 19 / 28

15
SZ2 series
7
ASSEMBLY
7-1 Assembly Diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
Assembly steps enclosed in
will be detailed on the subsequent pages.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid
scratching any parts or touching glass surfaces.
NOTE
* To reserve the ESD protection performance, be sure to ground the equipment using a grounding lead wire having a
4 mm banana plug.
** The eyepieces are provided with theft prevention screws (which can be retained using a flat-blade screw driver). If
required, replace the clamping knobs with these screws.
Commercially available
C-mount camera
(optional)
1
2
3
4
Eyepieces
Standard base
Ground lead wire*
Microscope body
of the SZ61TR
Eyepiece clamping
knobs**
Microscope body other
than the SZ61TR
Stage plate
Body clamping knob
Downloaded from ManualsNet.com search engine