Olympus Stylus 1, Инструкция по эксплуатации

Страница: 24 / 74

OPERATION OF BASIC MOTOR DRIVE PACKAGE
Attaching the Motor Drive 1
Remove the motor drive socket cap.
(See page 22, left column.)
IMPORTANT:
* Always store the socket cap in the
same place to avoid loss.
* After removing the motor drive from
the camera, be sure to replace the socket
cap to keep the camera free of dust and
Attach the Motor Drive 1 in the same
manner as with the Winder 1. (See page
22, middle column.)
dirt, and to prevent the possibility of
stray light entering the socket and fog-
ging the film.
* Do not remove the socket cap when
you do not use the motor drive.
Attaching the M. 18V Control Grip
Remove the M. 18V Battery Holder
1, insert twelve 1.5V penlight (AA) size
batteries into the battery holder, and
re-insert the battery holder into the
Control Grip.
Align the red index line on the rear
of the control grip with the red index
line on the rear frame of the motor drive
unit until the mounting catch is en-
gaged.
Carefully push the control grip for-
ward until it snaps into the front of the
motor drive.
*Voltage Requirement: DC 18V with
"AA" (penlight) size batteries, or DC
12V—16V with external power sources
of large potentiality in conjunction
with relay cords.
23