Olympus Stylus 1, Инструкция по эксплуатации

Страница: 8 / 74

The OLYMPUS OM-1 is supplied with
a 1.35V mercury battery (JIS H-D type)
to power its through-the-lens exposure
metering system. It will last approxi-
mately one year depending upon use
and must be replaced with an Eveready
(UCAR) EPX625, Mallory PX625
or equivalent. Substitutes must not be
used. (NOTE; The exposure meter stops
functioning when the battery runs out.
To prolong battery life, make sure the
Meter Switch Lever is in the "OFF"
position when the camera is not in
use.) To insert the battery:
1) Insert the edge of a coin into the
cap of the battery chamber and turn
counter-clockwise until the cap has
been removed.
1. Open the camera back.
Pull up on the rewind knob. A slight
resistance may be felt before the
camera back snaps partially open.
2) Place the battery in the battery
chamber making sure the positive side
(+) is facing out. The exposure meter
does not function if the battery is
inserted incorrectly.
3) Replace the cap tightly.
2. Load the camera.
Insert a film cartridge in the film
chamber and push the rewind knob
back into its original position. It may
be necessary to turn the rewind knob
slightly before it will lock securely in
place.
INSERTING THE BATTERY LOADING THE FILM FRONT LENS CAP
7