12
EN
Using basic functions
Taking photographs
1
Press the
n
button to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to
P
.
In mode
P
, the camera automatically adjusts
shutter speed and aperture in response to
subject brightness.
3
Frame the shot.
• When holding the camera, take care not
to cover the flash, microphone or other
important parts with your fingers, etc.
• To shoot using the viewfinder (EVF), press
the
u
(EVF) button. Every time you
press the
u
(EVF) button, the viewfinder
(EVF) and the back monitor are switched
alternately.
• If the display in the viewfinder (EVF) looks blurry, look through the
viewfinder (EVF) and rotate the diopter adjustment dial (P. 4) until the
display is in sharp focus.
4
Press the shutter button
halfway down to focus.
The camera was unable to focus
if the AF target mark flashes red.
Try focusing again.
• The shutter speed and
aperture value are displayed
in red if the camera is unable
to achieve optimal exposure.
P
P
F6.5
F6.5
1/400
1/400
Shutter speed
Aperture value
AF target
Press halfway
Содержание SP 100EE
