Olympus SH-2, Инструкция по эксплуатации

Страница: 53 / 119

53 EN 53 EN
For the operation method, refer to (P. 50).
Selecting the focusing area
z
[AF Mode]
Submenu 2 Application
Face/iESP
The camera focuses automatically. (If a face is detected, it is
shown by a white frame
*1 ; when the shutter button is pressed
halfway and the camera focuses, the frame turns to green *2 . If no
face is detected, the camera chooses a subject in the frame and
focuses automatically.)
Spot
The camera focuses on the subject located within the AF target
mark.
AF Tracking
The camera tracks the subject movement automatically to focus
on it continuously.
*1 For some subjects, the frame may not appear or may take some time to
appear.
*2 If the frame blinks in red, the camera cannot focus. Try refocusing on the
subject.
To focus on a moving subject continuously (AF Tracking)
1
Hold the camera to align the AF target mark on the subject and press the
A
button.
2
When the camera recognizes the subject, the AF target mark automatically
tracks the subject movement to focus on it continuously.
3
To cancel the tracking, press the
A
button.
• Depending on the subjects or the shooting conditions, the camera may be
unable to lock the focus or fail to track the subject movement.
• When the camera fails to track the subject movement, the AF target mark
changes to red.
Selecting the method for measuring the brightness
z
[ESP/
n
]
Submenu 2 Application
ESP
Shoots to obtain a balanced brightness over the entire screen
(Meters the brightness at the center and surrounding areas of
the screen separately).
5
(spot)
Shoots the subject at the center during backlighting (Meters the
brightness at the center of the screen).
• When set to [ESP], the center may appear dark when shooting against strong
backlighting.