background image

EN 2

En

Introduction

z

Unauthorized copying of this manual in part or in full, except for private 
use, is prohibited. Unauthorized reproduction is strictly prohibited.

z

OLYMPUS IMAGING CORP. shall not be responsible in any way for lost 
profits or any claims by third parties in case of any damage occurring 
from improper use of this product.

Please read the following items before use

This Case is a precision device designed for use at a water depth within 
40 m. Please handle it with sufficient care.

z

Please use the Case correctly after sufficient understanding of the 
contents of this manual in regard to handling of the Case, checks before 
use, maintenance, and storage after use.

z

OLYMPUS IMAGING CORP. shall in no way be responsible for 
accidents involving immersion of a digital camera in water.
In addition, expenses incurred for damage of internal materials or loss 
of recorded contents due to water entering the camera will not be 
compensated.

z

OLYMPUS IMAGING CORP. shall not pay any compensation for 
accidents (injuries or material damage) at the time of use.

„

Thank you for buying the Underwater Case PT-051 (hereinafter 
Case).

„

Please read this instruction manual carefully and use the product 
safely and correctly. Please keep this instruction manual for 
reference after reading it.

„

Wrong use may cause damage to the camera inside the Case due 
to water leakage, and repair may not be possible.

„

Before use, perform an advance check as described in this manual.

PT-051_EN.book  Page 2  Monday, January 17, 2011  4:10 PM

Содержание PT-051
































Отзывы: