Olympus PT-046, Инструкция по эксплуатации

Страница: 43 / 200

EN 15
En
Load the digital camera
1
Confirm that the digital camera is OFF.
2
Gently insert the digital camera into the Case.
3
Insert a silica gel bag (1g) between the bottom of the digital camera
and the Case.
The silica gel bag provided for prevention of fogging.
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Is silica gel inserted all the way at the specified location?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact
surface on the front lid?
• Is the waterproof function maintenance performed? For details of the
maintenance, see “6. Maintaining the Waterproof Function” (P.23) of
this manual.
CAUTION:
The silica gel bag will be caught when the Case is sealed and water leakage
will occur. Once silica gel has been used, the moisture absorption
performance will be impaired. Always replace the silica gel when the Case is
opened and closed.
2
3
PT-046_EN.book Page 15 Friday, December 19, 2008 10:22 AM