Olympus OmniScan MX2 Скачать руководство пользователя страница 36

Страница: 36 / 228

DMTA-20015-01EN [U8778402], Rev. J, January 2014

Chapter 1

Lower increment key (

)

Used to turn off the full-screen mode or to lower the increment step.

1.1.5

Help Key

The Help key is shaped in the form of an inverted triangle, and located on the lower-
left side of the OmniScan MX2 front panel.

Help key (

)

Pressing this key displays the online help for the currently selected function.

1.1.6

Indicator Lights

There are three types of indicator lights on the OmniScan MX2 front panel: power,
acquisition, and alarm. Each indicator light is described below.

1.1.6.1

Power Indicator Light

The power indicator light is located above the Power key (

). The color of this light

identifies the power status of the OmniScan MX2 (see Table 5 on page 24).

Table 5 Power indicator light statuses

Off

The OmniScan MX2 is turned off.

Flashing orange

The OmniScan MX2 is turned off. Batteries are charging.

Orange

The OmniScan MX2 is turned off. Battery charging is
complete.

Green

•

The OmniScan MX2 is turned on.

•

The OmniScan MX2 is turned on and batteries are
charging.

Flashing
green/orange

The OmniScan MX2 is in sleep mode. Batteries are
charging.

Содержание OmniScan MX2





































































































































































































































Результаты поиска

Содержание OmniScan MX2

Отзывы:

Olympus OmniScan MX2, Руководство пользователя, Страница: 36 / 228

Результаты поиска

Содержание OmniScan MX2

Отзывы: