Olympus OmniScan MX2 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 228

Olympus OmniScan MX2 Скачать руководство пользователя страница 21

DMTA-20015-01EN [U8778402], Rev. J, January 2014

Important Information — Please Read Before Use

9

Safety Symbols

The following safety symbols might appear on the instrument and in the instruction
manual:

General warning symbol:

This symbol is used to alert the user to potential hazards. All safety messages that
follow this symbol shall be obeyed to avoid possible harm or material damage.

High voltage warning symbol:

This symbol is used to alert the user to potential electric shock hazards greater
than 1000 volts. All safety messages that follow this symbol shall be obeyed to
avoid possible harm.

Safety Signal Words

The following safety symbols might appear in the documentation of the instrument:

The DANGER signal word indicates an imminently hazardous situation. It calls
attention to a procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in death or serious personal injury. Do not proceed beyond a
DANGER signal word until the indicated conditions are fully understood and met.

The WARNING signal word indicates a potentially hazardous situation. It calls
attention to a procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in death or serious personal injury. Do not proceed beyond a
WARNING signal word until the indicated conditions are fully understood and met.

«
...
19
20
21
22
23
...
»

Содержание OmniScan MX2





































































































































































































































Отзывы:

Нет отзывов