Olympus OEP-3, Руководство по обслуживанию

Страница: 100 / 176

3-8
OEP-3 V1 (UC)
3-2. Mechanical Adjustment
3-2-1. Mechanical Adjustment Mode
In this mode, the adjustment of the boards (PRT-13, SE-539 through SE-542, SE-544 through SE-548,
SE-550 through SE-557, and SU-52 through SU-56 boards) installed in a mechanical deck and the
assembly of mechanical parts are confirmed. The confirmation is carried out when replacing the boards
installed in a mechanical deck or the mechanical deck parts.
n
Various information items of a mechanical deck are stored in IC407 on the PRT-13 board. Be sure to
perform all mechanical adjustment after IC407 and PRT-13 board are replaced.
3-2-2. Entering the Mechanical Adjustment Mode
1. Turn on the power while pressing the DISPLAY and EXEC keys simultaneously. (Continue
pressing them until MECHA JIG MODE appears on the LCD display.)
2. The “MECHA_SETUP” menu in the mechanical adjustment mode appears on the screen (or LCD
display).
[MECHA SETUP menu]
[For OK] [For NG]
3. Press the
↑
and
↓
keys, move the cursor to the item to be adjusted or checked, and then press the
EXEC key.