7
Troubleshooting
106
EN
Problem
Possible cause
Solution
The display is blank.
The battery is not inserted
properly.
Check that the positive and negative
terminals of the battery are placed
correctly (
☞
P.9).
The remaining battery power
is low.
Replace or charge the battery (
☞
P.9,
The power is OFF.
Turn the power ON (
☞
Unable to operate the
voice recorder
The remaining battery power
is low.
Replace or charge the battery (
☞
P.9,
The power is OFF.
Turn the power ON (
☞
The voice recorder is in HOLD
mode.
Release HOLD mode (
☞
Unable to record
There is no remaining memory.
Erase unneeded files (
☞
P.47).
The maximum number of
recordable files has been reached. Select another folder (
☞
Playback is inaudible.
The earphones are connected to
the earphone jack.
To output the playback through the built-
in speaker, disconnect the earphones.
[
Off
] has been selected for
[
Speaker
].
To output the playback through the
built-in speaker, select [
On
] for [
Speaker
]
(
☞
P.67).
The volume is set to [
00
].
Adjust the volume (
☞
P.36).
The recording is too
quiet.
A low recording level has been
set.
Redo recording after setting the recording
level to [
High
] or [
Middle
] (
☞
The output level of the connected
external device may be too low.
Adjust the output level of the external
device.
The recording level hasn’t been
adjusted.
Redo recording after adjusting the
recording level (
☞
P.55).
Troubleshooting