DMTA017-01EN, Rev. F, August 2016
Scanner Assembly and Setup
25
Figure 2
‑
9 Loosened strap (
left
) and tightened strap (
right
)
2.3
Setting Up the Scanner
This section describes the procedure for preparing the HSMT-Compact scanner for
inspection.
To set up the scanner
1.
Connect the probes and any other equipment (a preamplifier, for example) to the
acquisition unit.
2.
Connect the encoder cable to the side of the scanner (carefully align the marks on
the connector), and then connect the other end of the encoder cable to the
instrument (see Figure 2-10 on page 25).
Figure 2
‑
10 Scanner connections
Water-
manifold
intake
Encoder
connector
Short section of
tube between the
two unused water-
manifold outlets
Water-manifold
outlets
Содержание HSMT-Compact
