DMTA-10083-01EN, Rev. 3, June 2017
Overview
33
2.4.4
Escape Key
The ESC key (
) is used to move the focus to the previous data field in the user
interface (UI). The ESC > Shift key sequence changes the display mode of the UI.
2.4.5
Enter Key
The Enter key (
) is used to accept a highlighted parameter (selected with the
adjustment knob). The Shift > Enter key sequence switches between coarse and fine
adjustment of the highlighted parameter with the adjustment knob.
2.4.6
Tab Key
The Tab key (
) moves the focus to the next data field in the UI. The Shift > Tab
key sequence enables you to navigate to the default Home screen in the UI.
2.4.7
Adjustment Knob
The adjustment knob increases or decreases the value of the highlighted adjustable
parameter (see Figure 2-8 on page 33). The adjustment knob also allows
scrolling/navigating through icons in the UI.
Figure 2
‑
8 Adjustment knob
Содержание EPOCH 6LT
