Olympus E-M10 Mark IV, Инструкция по эксплуатации

Страница: 84 / 186

Shooting
2
84 EN
One-touch white balance
Measure white balance by framing a piece of paper or other white object under the lighting
that will be used in the final photograph. This is useful when shooting a subject under natural
light, as well as under various light sources with different color temperatures.
1
Select [
P
], [
Q
], [
W
], or [
X
] (one-touch white balance 1, 2, 3, or 4) and
press the
INFO
button.
2 Photograph a piece of colorless (white or gray) paper.
• Frame the paper so that it fills the display and no shadows fall it.
•
The one-touch white balance screen appears.
3 Select [Yes] and press the
Q
button.
•
The new value is saved as a preset white balance option.
•
The new value is stored until one-touch white balance is measured again. Turning the
power off does not erase the data.
Choosing a focus mode (AF Mode)
You can select a focusing method (focus mode). You can choose separate focusing
methods for still photography mode and movie mode.
1
Press the
Q
button and use
FG
to highlight
AF Mode.
S-AF S-AF
C-AF C-AF MF MF
S-AF S-AF
MF
C-AF C-AF
TR
Single AF
S-AF S-AF
4:3
WB
AUTO
WB
AUTO
ISO
AUTO
L F
P
4K
AF Mode
2
Highlight an option using
HI
and press the
Q
button.
S-AF
(Single AF)
The camera focuses once when the shutter button is pressed
halfway. When the focus is locked, a beep sounds, and the AF
confirmation mark and the AF target mark light up. This mode
is suitable for taking pictures of still subjects or subjects with
limited movement.
C-AF
(Continuous AF)
The camera repeats focusing while the shutter button remains
pressed halfway. When the subject is in focus, the AF
confirmation mark lights up on the monitor and the beep sounds
when the focus is locked at the first time.
Even if the subject moves or you change the composition of the
picture, the camera continues trying to focus.
MF
(Manual focus)
This function allows you
to manually focus on any
position by operating the
focus ring on the lens.
Near
Focus ring
)