Olympus E-M10 Mark IV, Инструкция по эксплуатации

Страница: 143 / 186

Connecting the camera to a smartphone
5
143 EN
Pairing the Camera and Smartphone
Follow the steps below when connecting the devices for the first time.
•
Adjust pairing settings using OI.Share, not the settings app that is part of the smartphone
operating system.
1 Launch the copy of the dedicated OI.Share app previously installed on your
smartphone.
2
Select [Device Connection] in the
q
Playback Menu and press
I
.
•
You can also connect by tapping
G
in the monitor.
3
Follow the on-screen guide to adjust Wi-Fi/ Bluetooth settings.
•
The Bluetooth local name and passcode, the Wi-Fi SSID and password, and a QR
code are displayed in the monitor.
Connection Setup
Scan the QR code, using
the Olympus Image Share
app.
Disconnect
Bluetooth Name
Bluetooth Passcode
Wi-Fi SSID
Wi-Fi Password : xxxxxxxxxxx
: 000000
: xxx-x-x-xxxxxxxx
: 00000000
3/3
QR code
Wi-Fi SSID
Wi-Fi Password
Bluetooth local name
Bluetooth Passcode
4
Tap the camera icon at the bottom of the OI.Share display.
•
An [Easy Setup] tab will be displayed.
5 Follow the on-screen instructions in OI.Share to scan the QR code and adjust
connection settings.
•
If you are unable to scan the QR code, follow the on-screen instructions in OI.Share
to adjust settings manually.
-
Bluetooth : To connect, select the local name and enter the passcode displayed in
the camera monitor into the Bluetooth settings dialog in OI.Share.
- Wi-Fi: To connect, enter the SSID and password displayed on the camera
monitor into the Wi-Fi settings dialog in OI.Share.
• ‌w
1
will be displayed when pairing is complete.
•
The Bluetooth
®
icon indicates the status as follows:
0
: The camera is emitting wireless signal.
1
: Wireless connection has been established.
6 To end the Wi-Fi connection, press
MENU
on the camera or tap [Disconnect]
on the monitor screen.
•
You can also turn the camera off and end the connection from OI.Share.
•
At default settings, Bluetooth
®
connection is kept active even after Wi-Fi connection
is terminated, allowing you to shoot remotely with a smartphone. To set the camera
to also terminate
Bluetooth ® connection when terminating Wi-Fi connection, set
[Bluetooth] to [Off].