DSX1000
3.7 Safety symbols
The following symbols are placed on this product.
Study the meaning of the symbol and always use the product in the safest possible manner.
Symbol Meaning
Indicates a non-specific general hazard. Follow the description given after this symbol or in the instruction
manual.
Indicates that the surface becomes hot, and should not be touched with bare hands. It may cause burns.
Be careful not to pinch your fingers or hands.
Indicates that the seesaw type main switch is ON.
(Seesaw type is the type of switch where ON or OFF is selected by pressing it to ON or OFF side.)
Indicates that the seesaw type main switch is OFF.
Safety labels are placed on the portions which particularly require special cautions when using or operating this product.
Be sure to follow these instructions.
The illustration shows the case of the tilting frame DSX10-TF, but the safety labels are placed on the same positions of the
upright frame DSX10-UF.
Label position Safety label Instructions in the instruction manual
"Prevention of electric shock" (6 page)
"Prevention of electric shock" (6 page)
"Prevention of injury" (8 page)
"Prevention of eye injury" (7 page)
"Attachment/detachment of the lens attachment" (41 page)
9
3.7 Safety symbols
3. Safety precautions
Downloaded from
