11
4. Insert the CD-ROM in the CD-ROM drive.
5. Browse CD-ROM by Windows Explorer.
6. Run [Setup.exe].
When the OS is Windows
R
Vista or Windows
R
XP
The software cannot be installed unless the user account is registered as “computer administrator.”
If the user account is registered as a “Restricted account,” change it to the “Computer administrator” account.
(For the user account registration, refer to the instruction manuals for your computer.)
When the OS is Windows
R
2000
Log on as a user with the Administrator authority and make sure that you have the access rights to the following locations.
(For the access rights, refer to the instruction manuals for your computer.)
· Folder for installing this software.
· Windows System folder and System registry.
Trademark Information
SOFTWARE INSTALLATION
}This chapter describes the installation of the optionally available DP-BSW Basic Software for DP71.
Before Installation
Windows is a registered trademark of Microsoft Corporation.
All other brand and product names are trademarks or registered trademarks of their respective owners.
1
Installation Procedure
The device driver can be installed automatically during installation of the application software.
It is recommended to use the automatic installation facility for installing the device driver.
1. Windows
R
Vista
1. Ensure that the PCI interface board is installed in the PCI
card slot of the computer.
2. Start Windows Vista. (Log on with the Computer Administrator
account.)
3. When the following window appears in a while, click on the
[Cancel] button to close the window.
7. The [User Account Control] dialog box appears. Then click
on the [Continue] button.
8. Before proceeding to installation, close all running
applications. Then click on the [Next] button.
