background image

```

```

```

```

`

`

```

```

```

```

Setting time and date

Erase

Erase

Erase in Date
File Erase

Cancel

If [

Cancel

] is selected and

the

PLAY/OK

(

.

) button is

pressed, the recorder returns
to the stop mode.

File Erase

Erase in Date

 • If no operations are performed for 8 seconds, the recorder returns to the stop mode.

  • 

It may take for more than 10 seconds to complete the processing. Do not remove
batteries while processing. The data may be corrupted.

  

Check the battery level beforehand to ensure that that the batteries do not run out
while processing.

1

Press 

SEARCH/

MENU

 for more 

than 1 second.

2

Press 

0

 or 

9

 to 

highlight the item you 

want to set.

Press

0

or

9

to set a date.

s

The clock will start from the set date and time.
Press the

PLAY/OK

(

.

) button according to

the time signal.

s

Check the time and date settings before using
the product again if it is left unused for long
periods of time.

Select

Set

Safe and proper usage

General precautions

• Do not leave the recorder in hot, humid locations such as inside

a closed automobile under direct sunlight or on the beach in the
summer.

• Do not store the recorder in places exposed to excessive moisture or

dust.

• Do not use organic solvents such as alcohol and lacquer thinner to

clean the unit.

• Do not place the recorder on top of or near electric appliances such

as TVs or refrigerators.

• Avoid recording or playing back near cellular phones or other

wireless equipment, as they may cause interference and noise. If
you experience noise, move to another place, or move the recorder
further away from such equipment.

• Avoid sand or dirt. These can cause irreparable damage.
• Avoid strong vibrations or shocks.
• Do not disassemble, repair or modify the unit yourself.
• Do not operate the unit while operating a vehicle (such as a bicycle,

motorcycle, or go-cart).

• Keep the unit out of the reach of children.

<Warning regarding data loss>

• Recorded content in memory may be destroyed or erased by

operating mistakes, unit malfunction, or during repair work.

• For important recorded content, we recommend you to write it down

some where.

• Any liability for passive damages or damage of any kind occurred due

to data loss incurred by a defect of the product, repair performed by
the third party other than Olympus or an Olympus authorized service
station, or any other reasons is excluded from Olympus’s liability.

Batteries

f

 Danger:

• Batteries should never be exposed to flame, heat, short-circuited or

disassembled.

• Never store batteries where they will be exposed to direct sunlight,

or subjected to high temperatures in a hot vehicle, near a heat
source, etc.

f

 Warning:

• Do not solder lead wires or terminals directly onto a battery or

modify it.

• Do not connect the

=

and

-

terminals together. This may cause fire,

overheating or electric shock.

• When carrying or storing the batteries, be sure to put them in the

provided case to protect their terminals. Do not carry or store the
batteries with any metal objects (such as key rings).

 If this warning is not followed, fire, overheating or electric shock may

occur.

• Do not insert the batteries with their

=

and

-

terminals reversed.

• If any liquid from a battery gets into your eyes, promptly wash it off

with clean water and consult your doctor at once.

• Do not attempt to recharge alkaline, lithium or any other non-

rechargeable batteries.

• Never use any batteries with a torn or cracked outer cover.
• Keep batteries out of the reach of children.
• If you notice anything unusual when using this product such as

abnormal noise, heat, smoke, or a burning odor:

1

 remove the batteries immediately while being careful not to burn

yourself, and;

2

 call your dealer or local Olympus representative for service.

• Do not expose the batteries to water. Do not allow water to contact

the terminals.

• Do not remove or damage the batteries insulating sheet.
• Do not use the batteries if you find something wrong with them such

as leakage, color change or deformity.

• Unplug the charger if the charging is still incomplete after the

specified time it should take.

• Should any batteries liquid get on skin or clothing, promptly wash it

off with clean water.

• Keep batteries away from fire.

f

 Caution:

• Do not subject batteries to strong shocks.
• When using rechargeable batteries that have not been used for a

while, be sure to recharge them before use.

• Rechargeable batteries have a limited lifetime. When the operating

time becomes shorter even if the rechargeable battery is fully
charged under the specified condition, replace it with a new one.

Q1:

The power cannot be turned on.

A1:   • Batteries are exhausted.

• Batteries are inserted incorrectly.

  

Check 

=

 and 

-

 before inserting new batteries.

• Terminals are soiled.

 

 Clean them with a dry cloth.

Q2: Nothing happens when a button is pressed.
A2:  

• The 

POWER

 switch is set to [

OFF/HOLD

] position.

  

Slide 

the 

POWER

 switch to the [

ON

] position.

Q3:   No sound or quiet sound is heard from the speaker 

while playing back.

A3:   The earphone plug is plugged into the recorder.
 

 The volume is set to the low level.

Q4: Recording is not possible.
A4:

By pressing the 

REC

 (

-

) button:

•   Check if the display shows [Memory Full].
•   Check if the display shows [Maximum File Size is 

reached].

 

 Delete unnecessary files before recording. A maxi-
mum of 99 files can be recorded in a day.

Q5:

The playback speed is too fast (slow).

A5:   The recorder is set to fast (slow) Playback.
  

Use 

the 

PLAY SPEED

 button to set to normal play-

back.

Troubleshooting

Specifications

Recording medium:

Built-in flash memory (2GB)

Overall frequency:

HQ mode: 70 to 7,900 Hz
SP mode: 70 to 4,700 Hz

Guide to recording times:

HQ mode: Approx. 98 h.
SP mode: Approx. 202 h.

Microphone:

Electret Condenser Microphone (monaural)

Speaker:

Built-in ø 36 mm round dynamic speaker

Maximum power:

180 mW

Earphone jack (monaural):

ø 3.5 mm diameter, impedance 8 Ω or more

Power supply:

Two AAA (LR03) batteries

Continuous battery: 

Guide to alkaline battery life

Recording mode

HQ

SP

During recording mode

approx. 67 h.

approx. 80 h.

During playback mode
(Built-in speakers)

approx. 21 h.

approx. 21 h.

During playback mode
(Earphone)

approx. 45 h.

approx. 49 h.

Dimensions:

95 (L) mm x 50 (W) mm x 18.2 (T) mm

 (without protrusions)

Weight:

78 g (including battery)

Operating temperature:

0°C - 42°C

• Battery life is measured by Olympus. It varies greatly according to the

type of batteries used and the conditions of use.

• Your recorded contents are for your personal use or pleasure only. It is

prohibited to record copyrighted material without permission of the
copyright holders according to copyright law.

• Specifications and design are subject to change without notice for

improvement of performance.

To delete all files
recorded on a
specific date, press
the

SEARCH/MENU

button to switch to
the date display.

Select the file you want to delete and stop playback beforehand.

The number of files to be
deleted flashes.

The date of all the files to
be deleted flashes.

After deletion, files are
renumbered consecu-
tively, and the recorder
stops at the beginning of
the next file.

After deletion, the next
date with recorded files
available is displayed.

An erased 

file cannot be 

restored. Take care 

when deleting 

files.

Time & Date

Rec Mode

Language

Beep

3

Confirm the 

selection.

File management 

will be easier by 
setting the time 

and date.

Recommended settings by recording condition

Recording condition

Recommended settings

Rec Mode

MIC SENSE

D i c t a t i o n w i t h a l o t o f
background noise.

[HQ]

(high quality

sound recording)

[LOW]

Recordings for lessons and
meetings.

[HQ]

(high quality

sound recording)

[HIGH]

Lengthy recordings.

[SP]

(standard

recording)

[HIGH]

Changing the recording mode

Use the

0

and

9

buttons to switch recording modes.

```

Changing the display language

Use the

0

and

9

buttons to select the display language.

Turning the beep On/Off

Use the

0

and

9

buttons to turn the

operating sound On/Off.

```

```

Отзывы: