Olympus DM 620, Подробные инструкции

Страница: 71 / 113

71
4
EN
Menu setting method
Menu setting method
[Time] setting:
1
Press the
9
or
0
button to select
"Hour" and "Minute" in the [ Start Time ]
and "Hour" and "Minute" in the [ Stop
Time ].
2
Press the + or – button to set.
3
Press the
`
OK button to exit [ Time ]
selection.
[Rec Mode] setting:
Regardless of the regular [ Rec Mode ] (
☞
P.54),
timer recording will start in a set recording
mode.
1
Press the + or – button to select a
recording mode.
2
Press the
`
OK button.
3
Press the + or – button to select a
recording rate.
4
Press the
`
OK button to exit Recording
mode selection.
[Folder] setting:
1
Press the + or – button to select the
destination to save to (Memory).
2
Press the
`
OK button to move to the
[ Folder ] setting.
3
Press the + or – button to select the
destination to save to (Folder).
4
Press the
`
OK button to exit [ Folder ]
setting selection.
[Mic Sense] setting:
Regardless of the recorder’s microphone
sensitivity setting (
☞
P.53), timer recording
will start at a set microphone sensitivity.
1
Press the + or – button to select from
[ High ], [ Middle ], and [ Low ].
2
Press the
`
OK button to exit [ Mic Sense ]
selection.
6 Press + or − button to select
[ Finish ].
• Programmed settings will be applied
and the display will return to the
preset number selection menu.
• To set other preset numbers, repeat
the abovementioned procedure.
• When the
9
button is pressed
in the Select in Advance Menu, the
settings selected can be confirmed.
8 Press the F2 ( EXIT ) button to
complete the setting.
• The [
«
] will appear on the display.
Notes
• If the recorder is in use at the preset start
time, the timer recording will start directly
after stopping the recorder.
• Even if the power is turned off or the
recorder is put on Hold, timer recording
will start at a specified time.
• If three timer recordings have the same
starting times, [ Preset 1 ] has the highest
priority and [ Preset 3 ] has the lowest.
• If the starting time for timer recording
and alarm playback (
☞
P.72) is set for
the same time, timer recording will have
priority.
7 Press the
`
OK button to
complete the setting.
When setting to [ ON ]