CX21 MAINTENANCE MANUAL
REPAIR PROCEDURE
- 19 -
5. Replacing Pinion Ass’y of Plane Stage
(1) Loosen the stopper (A) and remove the condenser (B) downward by turning
Screws : AB3X8SA, 2pcs. (*1)
the knob (F).
(2) Remove the left dovetail (C) as seen from the front side.
(3) Remove the right dovetail (D).
Screws : AB3X8SA, 2pcs. (*2)
(4) Remove the pinion spring (E).
(5) Remove the pinion ass’y (F).
(6) Assemble the reverse order of disassembly.
Note on assembly :
(C)
(D)
(A)
(E)
*1
*2
Grease;
Grease;
OT2008
OT2008
Grease;
OT2008
Left and right
dovetails
sliding
surface
sliding
surface
Loosen the stopper
until it removes from
the groove of
condenser.
: Pushing direction
: Adjust the position of
dovetail (C).
Front side
1) Apply grease to the portions shown as the above figure.
2) The right dovetail (D) is mounted by pushing it in the arrow directions.
3) The left dovetail (C) is mounted by pushing it in the upward direction.
At this time, adjust the position of dovetail (C) in the left and right directions so that
the condenser moves smoothly without a play (vertical movement).
(F)
(B)
A009
