En
En
39
J
PROTECTING PICTURES
You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-frame
erase function.
1
Set the mode dial to
q
and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture you want
to protect.
3
Press
0
.
• To cancel protection, press
0
again.
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
J
ERASING PICTURES
This function lets you erase recorded pictures. Single-frame erase erases only
the picture displayed on the monitor and all-frame erase erases all the pictures
on the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
Single-frame erase
1
Set the mode dial to
q
and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture you want
to erase.
3
Press
S
.
• The
S
ERASE screen is displayed.
4
Press
ac
to select YES, then press
e
.
• The picture is erased and the menu is closed.
All-frame erase
1
In the top menu, select MODE MENU
→
CARD
→
CARD SETUP,
and press
d
.
2
Press
ac
to select
R
ALL ERASE, then press
e
.
3
Press
ac
to select YES, then press
e
.
• All the pictures are erased.
Note
Note
basic_e_d4155_6.fm Page 39 Monday, December 8, 2003 10:02 AM