168
9
C
a
m
e
ra
S
e
tti
n
g
s
Setting the date and time
The date/time is saved with recorded pictures and file names are assigned
based on the date/time settings.
1
Select SETUP
X
, then press
d
.
g
“Menu basics” (P.38)
• Press
c
repeatedly until
X
is displayed on the
monitor.
2
Press
ac
to select one of the following
date formats:
Y-M-D (Year/Month/Day),
M-D-Y (Month/Day/Year),
D-M-Y (Day/Month/Year).
Then press
d
.
• Move to the year setting.
• The following steps show the procedure used when the date and time settings
are set to Y-M-D.
3
Press
ac
to set the year, then press
d
to
move to the month setting.
• To move back to the previous setting, press
b
.
• The first two digits of the year are fixed.
4
Repeat this procedure until the date and time are completely set.
• The time is displayed in the 24-hour format. For example, 2pm will be
displayed as 14:00.
5
Press
e
.
• For a more accurate setting, press
e
when the time signal hits 00 seconds.
• The date and time settings will be returned to the factory default setting if the
camera is left without the battery for a few days. The settings will be
canceled more quickly if the battery was only loaded in the camera for a
short time before being removed. Check that the correct date and time have
been set before shooting.
Mode dial
Arrow pad
OK button
Y M D
SELECt
GO
SEt
200
2004 .
4 . 01 .
1 . 01
01
SELECt
GO
SEt
200
200
4
. 01 .
1 . 01
01
Note
