145
8
C
u
st
om
iz
ing t
h
e
cam
era
8 Customizing the camera
ALL RESET – Saving the camera’s settings
This function lets you keep the current camera settings when you turn off the
power. The same settings are then reactivated next time you turn the camera
on. The settings affected by All Reset are listed on the next page.
The All Reset setting (ON/OFF) applies to all the modes. If All Reset is set in
one mode, this setting applies to all the other modes, both shooting and
playback.
ON
All settings are returned to the factory default settings after the power is
turned off.
Ex. If the record mode is changed to SQ1 and All Reset is set to ON,
the record mode will return to HQ (factory default setting) next time
the camera is turned on.
OFF
The settings made before the power is turned off are saved and are
activated again next time the camera is turned on.
1
In the top menu, select MODE MENU
E
ALL RESET ON or OFF, and press
e
.
Or in
C
mode, select
E
ALL
RESET ON or OFF, and press
e
.
g
“Menu basics” (P.38)
• Press
e
again to exit the menu.
• In
C
mode, set the mode dial to a different
mode to exit the menu.
• My Mode settings and functions on the SETUP tab (ALL RESET,
W
,
8
,
etc.) are not returned to the factory default settings even when All Reset is
set to ON.
• When ALL RESET is set to OFF, it may take time to start up when the power
is turned on.
Mode dial
Arrow pad
OK button
Note