Chapter 10
Miscellaneous
124
Troubleshooting
1
The batteries are
exhausted.
2
The power is off.
3
The batteries are
loaded incorrectly.
4
The batteries are
temporarily unable to
function.
5
It is connected to a
personal computer.
6
The camera is in the
sleep mode.
1
Replace the batteries with
new ones.
2
Press the POWER switch to
turn on the power.
3
Reload the batteries
correctly.
4
The batteries may be too
cold. Warm them before use
by allowing them to return to
room temperature, or if
outdoors, putting them in an
inner jacket pocket.
5
The camera will not operate
while it is connected to a
personal computer.
6
Operate the camera (press
the shutter button, turn the
mode dial, etc.)
P. 21
P. 27
P. 21
–
–
P. 27
POSSIBLE CAUSES
CORRECTIVE ACTION
REF. PAGE
The camera does not turn on or function buttons do not respond.
The viewfinder does not turn on.
1
The camera is in the
sleep mode.
2
The camera is in the
playback mode.
1
Operate the camera (press
the shutter button, turn the
mode dial, etc.)
2
Set the mode dial to any
position except
.
P. 27
P. 44
The monitor does not turn on.
1
The camera is in the
sleep mode.
2
The camera is in the
battery save mode.
1
Operate the camera (press
the shutter button, turn the
mode dial, etc.).
2
Set BATTERY SAVE to OFF
in the menu.
P. 27
P. 116
The card access lamp and self-timer lamp blink at the same time.
1
The batteries are
exhausted.
1
Replace the batteries with
new ones.
P. 21
