116
Chapter 8
Sleep timer
The camera automatically enters the sleep mode if the time you have set has
passed with no operations being performed. To leave the sleep mode,
operate any button (press the shutter button or arrow pad, etc.).
In the top menu, select MODE MENU
T
SETUP
T
SLEEP, then select a
setting from the following: 30sec, 1min, 3min, 5min or 10min. Press
.
Press again to cancel the menu.
~
“How to use the menu” (P. 38)
Mode dial
setting
Factory default setting:
1MIN
●
In the
,
,
,
, or
mode, this function's setting is the same
as that selected in the other shooting modes.
●
The sleep timer can only be changed in the shooting mode. In the playback
mode, the sleep timer is always set at 3 minutes.
●
Sleep does not work when using an AC adapter.
●
If a slide-show lasts more than 30 minutes, the camera automatically enters
the sleep mode.
Note
Battery save mode
Saves battery power during shooting:
●
Regardless of the sleep timer setting, the viewfinder will turn off if no
operations are performed for 30 seconds.
●
The monitor is disabled in battery save mode.
In the top menu, select MODE MENU
T
SETUP
T
BATTERY SAVE
T
ON or OFF. Press
. Press again to cancel the menu.
~
“How to use
the menu” (P. 38)
Factory default setting:
OFF
Mode dial
setting